D型系列空氣冷卻器(又稱冷風機)是一種適用于各種冷庫(如土建冷庫或組合冷庫)的冷卻降溫設備。D型系列空氣冷卻器有DL. DD和DJ型三種型式，分別適用于不同庫溫的冷庫。它具有結構緊湊,重量輕,不占用冷庫使用面積，庫溫均勻,效率高等優點，使冷庫內貯藏的食品迅速降溫,大大提高了貯藏食品的保鮮度。

D series air cooler (also known as cold air cooler) is a kind of suitable for all kinds of cold storage (such as cold storage or combined cold storage) cooling equipment.D series of air cooler are DL, DD and DJ three types of cold storage, which is suitable for different temperature. It has compact structure and light weight,Does not take up the cold storage area, Couvin uniform, efficient, so that the storage of food in the refrigerator to cool down, greatly improving the storage of foodFreshness degree.

產品用途

D型系列空氣冷卻器可與不同制冷量的壓縮機組配套,用于不同庫溫的冷庫中。作為制冷設備，其中DL型適用于庫溫為0°C左右的冷庫，如保存鮮蛋或蔬菜的冷庫; DD型適用于庫溫為-18°C左右的冷庫,作為肉類、魚類等冷凍食品的冷藏用; DJ型適用于庫溫為- 25°C的冷庫，作為鮮肉或鮮魚制品或調理食品的速凍用。

Application

D type air cooler can be compressed with different amount of refrigeration unit, used for cold stor-age in different temperature. As refrigeration equipment, which dl for Koon for about 0 DEG C cold stora-ge, such as eggs or vegetables cold storage preservation; DD genotype for Koon for about 18 degrees of Cold storage, used as a meat, fish and frozen food storage; DJ type applicable to Koon - 25 C cold stora-ge, as fresh meat or fish products or conditioning of quick-frozen food with.

產品特點

1、殼體采用噴塑工藝或軋花鋁板并表面噴塑處理，有強烈的耐腐蝕性,外觀美觀大方。

2、盤管以新穎方式布置,以減小風測阻力,套片后,再通過液壓漲管將鋁翅片緊裹在銅管上,減小接觸熱阻,提高傳熱效率。

3.產品經試壓后,再經過三氯乙烯在管內的清洗,以除去管內的油污、水份和氧化皮等。當用戶充入制冷劑后不會出現由于系統內雜物油污而造成膨脹閥堵塞等故障。

4、選用專用的風機電機,耗電量小、風量大、噪音低、射程遠,以保證潮濕低溫狀態下正常運轉。

5、采用絕緣性強的U型管狀電熱管,電熱管插入盤管內,間距分布及功率設計合理，融霜時間短,效果好。

6、采用槽型吊架,吊裝方便。

7、出廠前全部經過保壓充氮處理。

Features

1, the housing using spray technology or crimped aluminum and surface spray, strong corrosion resistance, elegant appearance.

2, the coil is arranged in a novel way to reduce wind resistance measured after set piece, and then up through the hydraulic pipe wrap in aluminum fins on copper tubes, reducing the contactResistance. improve heat transfer ffici-

3, the product after the pressure test, and then after trichlorethylene in the tube cleaning to remove oil, water and 0-xide tube and so on. When the user charge the refrigerant does not occur due to debris in the system caused by the expansion valve blockage of oil and other failures.

4, the choice of a dedicated fan motors, power consumption, air volume, low noise, long range, in order to ensure the normal operation at low temperatures and wet.

5, the use of insulation and a U-shaped tubular heating pipe, heating pipe inserted into the coil, the pitch and pow-er distribution design is reasonable, defrost time is short, the effect is good.

6, using slotted hanger for easy lfting.

7. the factory after all packing nitrogen treatment.